1.1 Power Tools
Can you recognize power tools by their color?
A. Yes, it is always the same
B. No, the color differs per brand
What should you always wear when working with machines?
1.2 the hand-held circular saw
What should you keep in mind when you start working with the hand-held circular saw?
1.3 the router
How many handles does a router have?
A.1
B.2
C 3
D. 4
2. What is the name of the part that allows you to set the milling depth?
A. Ball bearing
B. Missile strike
C. Revolver Strike
3. What should you do first when you have to (re)set up the machine?
A. loosen the cutting depth adjustment
B. remove the plug from the socket
C. tilt the footplate backwards
D. turn the cutter half a turn and block it
1.4 the tacker
- Are tackers safe machines?
- Why is there no cord and plug on a tacker?
- What can you put the staples in?
2.1 Machinery
Can working with machines be dangerous?
A. Yes
B. No
2. When should you read the security card?
A. Before turning on the machine
B. After you turn on the machine
3. Why must the extraction be on when you work with machines?
2.2 the circular saw machine Should the hood cover the saw completely?
A. Yes
B. No
2. Why do you use a push stick?
3. How do you hold your hands while sawing?
2.3 the band saw machine Is a band saw machine on wheels?
A. Yes
B. No
2. Do you have to mark the cutting line on the wood first?
A. Yes
B. No
3. Can you retrieve the wood during sawing?
A. Yes
B. No
2.4 the table milling machine
Can you work with the milling machine yourself?
A. Yes
B. No 2.
Draw a groove in the plank below
2.5 the belt sander
Should the extraction be on when sanding?
A. Yes
B. No
2. Do you have to push the wood against the sanding belt with a lot of force?
A. Yes
B. No
3. Which parts start moving when you turn on the machine?
4. Are both rollers driven by a motor?
A. Yes
B. No
3.1 Transport Carts
Why is it better to use a cart when you have to move a lot of heavy beams?
3.2 the hand truck Can you easily move very long planks with the trolley?
A. Yes
B. No
2. Can you also move a stack of boxes with the trolley?
A. Yes
B. No
3.3 the record cart
Why is it better to drive the record cart with 2 people?
3.4 the pallet truck
Find a photo of a pallet and show it to your supervisor.
4.1 Timber joints Which is stronger?
A. A wood joint
B. Nails
2. Which is more beautiful?
A. When the wood joint is tight
B. If the wood joint is loose
4.2 loose spring connection
Do you always see the connection of the loose spring on the head of the wood?
A. Yes
B. No
4.3 Groove-and-brass connection
How thick is the spring always?
A. 1/3 of the wood thickness
B. 1/30 part of the wood thickness
C. 1/300 part of the wood thickness
4.4 the miter joint
How many degrees is the angle of a piece of wood in the miter joint?
A. 15 degrees
B. 30 degrees
C. 45 degrees
2. What do you call an angle of 90 degrees?
A. Off the hook
B. a right angle
C. a witch corner
4.5 the dowel joint
What do you use in the dowel joint to make 2 parts of wood together?
A. a dowel
B. a lamello
C. a domino
D. a nail
2. what happens if you drill the holes of the dowel joint too small?
A. then the connection is tight
B. then the dowel will not fit
4.6 the lamello connection
What power tool do you use to make the lamello connection?
A. a drilling machine
B. a domino milling machine
C. a lamello milling machine
2. What do you do if you are going to make a lamello connection?
A. you drill a hole in the wood
B. you mill a slot in the wood
4.7 the domino connection
Why are there ridges on the side of a domino?
A. because it is cheaper
B. because the glue stays in place better
C. because it is better for the environment
2. a domino is a…
A. miter joint
B. mounting material
C. mortise and tenon joint
5.1 veneer
What is veneer?
A. a very thin layer of plastic
B. a very thin layer of concrete
C. a very thin layer of wood
D. a very thin layer of steel
5.3. Chipboard
Which photo is chipboard derived from?
Circle the correct answer.
- Drawing board
- A4 paper
- Pencil
- Eraser
- Ruler
